MR LEARN

The main criterion for deciding to use a background color is usually insufficient contrast formation between the workpiece surface to be tested and the magnetic particles in the test equipment used. However, as is often the case in NDT, it is precisely these contrasts that enable us to reliably evaluate our tests. So what else is there to say about contrast paint? Quite a lot!

The Reflecon TopoTrack 2in1 scanning spray was developed to significantly minimise the process time of a 3D scan. The process time is not only reduced by eliminating the need to stick on and remove reference points, but also because you can guide your scanner over the object much faster.

There are many aspects such as storage, handling (including transportation if necessary), but also the disposal of test equipment. Safety data sheets must also first be understood in order to ensure safe handling of test equipment. Ideally, it is better tob e safe than sorry.

Our pocket-sized penetrant system is the ideal solution when only small areas need to be inspected, the environment does not allow for contamination or known areas need to be inspected quickly.

The inspection with a hand magnet, especially in fluorescent crack testing, often presents a challenge to operational processes due to resulting waiting times in production. Additionally, the operation of the three essential components – hand magnet, testing material, and UV light – usually requires two hands constantly switching.

The ideal application is a homogeneous matting layer and a compromise between various requirements: Necessary layer thickness, necessary sublimation time, measurement uncertainty of the scanner and software.